POA-1000A Gigabit PoE Injector

POA-1000A Gigabit PoE Injector

POA-1000A Gigabit PoE Injector

$ 66

Single Port POE Power Source Injector IEEE802.3af/at PoE,10/100/1000Mbps LAN
Up to 30W of PoE Power Feeding on 2-pairs
IEEE 802.3af/at Compliant with 2-event classification

OVERVIEW Lantech POA-1000A is a single port, PoE PSE solution for remote PoE PD devices. Generating up to 30W, POA-1000A supplies remote power for new applications such as wireless Access Points, pan-tilt-zoom (PTZ) IP cameras and video-phones. It complies to IEEE 802.3af/at PoE standard and can work with 10/100Base-T networking devices and emerging 1000Base-T devices such as WiMAX and wireless IEEE 802.11n access points.

FEATURES Up to 30W of PoE Power Feeding on 2-pairs IEEE 802.3af/at Compliant with 2-event classification Compatible with IEEE 802.3af/at or Legacy PoE applications Safe and Reliable Power to WLAN Access Points Protects low power devices to receive only the power they need Automatic detection and protection of non–standard Ethernet terminals Supports 10/100/1000Base-T LAN environment Parallel slide-in design to ease the installation

Hardware Specification No.of PoE PSE Ports 1 Pass Through Data Rates 10/100/1000 Mbps Pin Assignment and Polarity 1/2(+),3/6(-) Output Power voltage 52VDC Maximal User Port Power 30 Watt Maximal Input Power AC Input Voltage 100~240VAC Requirements AC Input Current 0.8A @ 100-240 VAC AC Frequency 50 to 60 Hz Dimensions 87.9 mm x 51.3 mm x 166 mm Weight 350g Indicators System Indicator: AC Power (Green) Operating Ambient Temperature -10 to 45°C Regulatory IEEE 802.3af/at, RoHS Compliant, CE Safety Approvals EN 60950:2006 Warranty 1 years *Future Release **Optional

PoE data-power splitter POS-100A

PoE data-power splitter POS-100A

PoE data-power splitter POS-100A

$ 30

Adjustable output Power Over Ethernet Splitter
Encloses Φ2.5, Φ2.1, Φ1.7 and Φ1.3 DC jacks
IEEE802.3af compliance
Short circuit protection

OVERVIEW Lantech POS-100A is the most comprehensive splitter compliant with IEEE 802.3af PoE standard in the market. It's well-cover output voltage 5V, 9V, 12V range can connect with most market PDs (Power Device) including Wireless AP, Camera, VOIP phone etc. Lantech POS-100A encloses Φ2.5, Φ2.1, Φ1.7 and Φ1.3 DC jacks to suit with every PDs power diameter. Lantech POS-100A splits data and power signal over same Ethernet UTP cable and transfer input 48V (PoE standard) to 3 kinds voltages to meet with each PD needs. The inside PoE chip can correspond to PoE impedance signal sent by PoE injector or PSE (Power Source) to handshake with PoE standard first and then to deliver 48V power to drive PD, in which it prevents the risk of burning down the PD. The DIP switch of POS-100A allows users to change the output voltage easily and the LEDs shows the current output voltage. Lantech POS-100A's light-weight and compact design can easily go with any PD's installation. Lantech POA-100A injector is the best kit for POS-100A for PoE solution.

FEATURES 5v, 9v, 12v output adjustable by the DIP switch Short circuit protection Delivering power and data to equipment For Wireless AP, Bluetooth AP, IP Camera, IP Telephones, remote power feeding application IEEE802.3af compliance Plug-and-Play Light weight and compact size Regulate output voltage by switch Encloses Φ2.5, Φ2.1, Φ1.7 and Φ1.3 DC jumper cables

Hardware Specification Data Rate 10/100 Mbps Input Power Requirement 1/2(+),3/6 (–) or 4/5(+),7/8(-) Input Power Voltage 48Vdc/0.3A Output Power 5V(2.4A),9V(1.3A),12V(1A); Maximum 12W DC Jack DC 5.5*2.5*12 mm (White) DC 5.5*2.1*12 mm (Blue) DC 4.8*1.7*12 mm (Yellow) DC 3.5*1.3*12 mm (Red) (L-300mm) Connectors Shielded RJ-45 LED DC Power (Green); 5V/9V/12V(Green) Operating Temperature -10˚C~ 45˚C Dimension 80mm x 55mm x 31mm (L x W x H) Weight 76g Regulatory IEEE 802.3af, RoHS Compliance Safety Approvals EN 60950:2006, CE/FCC Warranty 1 years *Future Release **Optional

POA-100B PoE Injector

POA-100B PoE Injector

POA-100B PoE Injector

$ 55

Single Port 802.3at PoE Power Source Injector, 10/100Mbps LAN
Power over Ethernet injector conforms to IEEE802.3at
Backward compatible to IEEE802.3af
Automatic detection and protection of non-standard Ethernet terminals

OVERVIEW Lantech POA-100B is a single port PoE solution for remote PoE PD devices. The low power PoE power source (PSE) injector delivers 48VDC power to PoE-devices (PD), such as wireless AP router, IP CAM, VoIP phone etc through Ethernet UTP/STP cable. It can drive the power distance up to 100 meters with maximum power output up to 30W and prevent from burn down any non-PoE devices. Generating up to 30W, POA-100B complies with IEEE 802.3at PoE standard and backward compatible to IEEE802.3af. It protects low power devices to receive only the power they need. The unique parallel slide-in design also makes the installation easier.

FEATURES Up to 30W of PoE Power Feeding on 2-pairs IEEE 802.3at compatible Backward compatible to IEEE802.3af Protects low power devices to receive only the power they need Supports 10/100TX LAN environment Automatic detection and protection of non–standard Ethernet terminals Parallel slide-in design to ease the installation

Hardware Specification No. of PoE Ports 1 Pass Through Data Rates 10/100 Mbps Pin Assignment and Polarity 1/2(+),3/6(–) Output Power Voltage 52 VDC User Port Power Up to 30 W AC Input Voltage 100-240 VAC AC Input Current 0.8A @ 100-240 VAC AC Frequency 50 to 60 Hz Dimensions 145 mm x 60 mm x 40 mm Weight 350g Indicators System Indicator: AC Power (Green) User Indicator: Channel Power Connectors Shielded RJ-45, EIA 568A and 568B Operating Ambient Temperature -10 to 45°C Regulatory IEEE 802.3at/af, RoHS Compliant, CE Safety Approvals EN 60950:2006 Thermal Rating 27 BTU/Hr (@240VAC) Warranty 1 years

ORDERING INFOMATION POA-100B……………………………P/N: 8450-353 Single Port PoE Power Source Injector, IEEE 802.3at/af, 10/100Mbps LAN

LPES-2208CA; 8port PoE 10/100TX + 2Giga combo SNMP Switch

LPES-2208CA; 8port PoE 10/100TX + 2Giga combo SNMP Switch

LPES-2208CA; 8port PoE 10/100TX + 2Giga combo SNMP Switch

$ 900

8 10/100TX + 2 100M/Giga SFP Combo Managed Switch w/ 8 PoE Injectors & Pro-Ring System
Pro-Ring covers X-Ring, Couple Ring, and Dual Homing Topology
X-Ring provides recovery time < 10ms up to 250 units in one Ring Fully complies with IEEE802.3af PoE standard

OVERVIEW Lantech LPES-2208CA is a 8-Port 10/100TX built in 8 PoE Injectors + 2-Port 10/100/1000T / Dual Speed SFP combo Managed Switch with SNMP and “X-Ring” Self-Heal Recovery functionality. The SNMP features are including QoS for 4 queues, 801.q VLAN, IGMP snooping and query mode as well as SNTP and SMTP. Lantech LPES-2208CA supports Pro-Ring, fast network recovery scheme in less than 10ms. Couple Ring is to ensure network recovery protection between two Pro-Ring groups. Dual homing is to back up the Pro-Ring groups when connect to upper layer or core switch. LPES-2208CA supports 48V input power and fully complies with IEEE802.3af feeding power up to 15.4W per port up to 8 ports via twisted pair cable. Lantech LPES-2208CA is the best switch to use in Surveillance, Traffic Management, Automation, Airport, Wireless backhaul etc where PoE function and SNMP are required.

FEATURES PoE Management PoE Enable/Disable, Power limit by classification, Power limit by management, Power feeding priority, Detect Legacy Signature Pro-Ring System Covers X-Ring, Dual Homing, Couple Ring Topology X-Ring provides redundant backup and recovery time below 10ms for a ring of up to 250 switches Port Based, Tag Based VLAN, GVRP Port Trunk with LACP QoS (Quality of Service) Per port provides 4 priority queues Port Base, Tag Base and Type of Service Priority Port Mirror: Monitor traffic in switched networks Security Port Security: MAC address entries/filter IP Security: IP address security management to prevent unauthorized intruder. Login Security: IEEE802.1X/RADIUS IGMP Query mode for Multi Media Application Support multicast filter IEEE802.1d Spanning Tree;IEEE802.1w RSTP Bandwidth Control System Event Log SNMP Trap & Email Alert for events Device cold start, Power status, Authentication failure, Pro-Ring topology changed, Port Link up / Link down

Hardware Specification Switch Architecture Back-plane (Switching Fabric): 5.6Gbps Packet throughput ability (Full-Duplex): 2.38Mpps @64bytes Transfer Rate 14,880pps for Ethernet port 148,800pps for Fast Ethernet port Mac Address 8K MAC address table Connector 10/100TX: 8 x RJ-45 with auto MDI/MDI-X function 10/100/1000T/ Mini-GBIC Combo: 2 x RJ-45 + 2 x 100/1000 SFP sockets RS-232 connector: DB-9 Network Cable 10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E, 6 cable EIA/TIA-568 100-ohm (100m) 100Base-TX: 2-pair UTP/STP Cat. 5/ 5E, 6 cable EIA/TIA-568 100-ohm (100m) 1000Base-TX: 2-pair UTP/STP Cat. 5/ 5E, 6 cable EIA/TIA-568 100-ohm (100m) Optical Cable Distance: Multi mode: 0 to 5 km, 1300 nm (50/125 μm, 800 MHz*km) 0 to 4 km, 1300 nm (62.5/125 μm, 500 MHz*km) Single mode: 0 to 40 km, 1310 nm (9/125 μm, 3.5 PS/(nm*km)) 0 to 80 km, 1550 nm (9/125 μm, 19 PS/(nm*km)) Min. TX Output: Multi mode: -20 dBm Single mode: 0 to 40 km, -5 dBm; 0 to 80 km, -5 dBm Max. TX Output: Multi mode: -14 dBm Single mode: 0 to 40 km, 0 dBm; 0 to 80 km, 0 dBm Sensitivity: -36 to -32 dBm (Single mode); -34 to -30 dBm (Multi mode) Protocol CSMA/CD PoE pin assignment RJ-45 port # 1~# 8 support IEEE 802.3af End-point, Alternative A mode. Per port provides 15.4W ability. Positive (VCC+): RJ-45 pin 1,2. Negative (VCC-): RJ-45 pin 3,6. LED System: Power Per port: Link/Activity, Speed, PoE Gigabit Combo port: Link/Activity Power Supply External Power Supply: AC 100 ~240V , 1.5A , 50/60Hz DC Output +48V / 2A Power Consumption   AC 90V Un- load DC 48V 102mA AC 0.143A PF 0.42 AC- Iinput Power (watts) 5.4 Full Load (Only Ethernet) DC 48V 180mA AC 0.243A PF 0.46 AC- Iinput Power (watts) 10.3 Full Load (Only PD load) DC 48V 1431mA AC 0.868A PF 0.96 AC- Iinput Power (watts) 75 Full Load AC- Iinput Power (watts) 80.6   PoE Power budget 15.4W per port, Max 84 Watts with 96W DC-48V power adapter Operating Humidity 5% to 95% (Non-condensing) Operating Temperature Standard: 0℃~45℃; Storage Temperature -40℃ to 85℃ Case Dimension 217mm (W) x 140mm (D) x 43mm (H) Fan Number 0 Installation Rack mount and wall mount ear. EMI FCC Class A, CE Safety CE/EN60950-1 Warranty 2 years Software Specification Management SNMP v1 v2c, v3/ Web/Telnet/CLI Management SNMP MIB RFC 1215 Trap, RFC1213 MIBII, RFC 1157 SNMP MIB, RFC 1493 Bridge MIB, RFC 2674 VLAN MIB, RFC 1643 , RFC 1757, RSTP MIB, Private MIB VLAN Port Based VLAN IEEE 802.1Q Tag VLAN (256 entries)/ VLAN ID (Up to 4K, VLAN ID can be assigned from 1 to 4096.) GVRP (256 Groups) Port Trunk with LACP LACP Port Trunk: 4 Trunk groups/Maximum 4 trunk members Spanning Tree Support IEEE802.1d Spanning Tree and IEEE802.1w Rapid Spanning Tree Pro-Ring Support X-Ring, Dual Homing, Couple Ring Topology. Provide redundant backup feature and the recovery time below 10ms Quality of Service The quality of service determined by port, Tag and IPv4 Type of service, IPv4/IPv6 Different Service Class of Service Support IEEE802.1p class of service, per port provides 4 priority queues Port Security Support 100 entries of MAC address for static MAC and another 100 for MAC filter Port Mirror Support 3 mirroring types: “RX, TX and Both packet”. IGMP Support IGMP snooping v1,v2 256 multicast groups and IGMP query Support multicast filter IP Security Support 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder. Login Security Support IEEE802.1X Authentication/RADIUS Bandwidth Control Support ingress packet filter and egress packet limit The egress rate control supports all of packet type and the limit rates are 100K~102400Kbps(10/100), 100K~256000Kbps(1000) Ingress filter packet type combination rules are Broadcast/Multicast/Unknown Unicast packet, Broadcast/Multicast packet, Broadcast packet only and all of packet. The packet filter rate can be set from 100K~102400Kbps(10/100), 100K~256000Kbps(1000) Flow Control Support Flow Control for Full-duplex and Back Pressure for Half-duplex System Log Support System log record and remote system log server SMTP Support SMTP Server and 6 e-mail accounts for receiving event alert SNMP Trap 1. Cold start, 2. Link down, 3. Link up, 4. Authorization fail, 5. PD disconnect trap-PoE port event DHCP Provide DHCP Client/ DHCP Server functions SNTP Support SNTP to synchronize system clock in Internet Firmware Update Support TFTP firmware update, TFTP backup and restore. *Future Release **Optional

24 10/100TX + 2 1000T/SFP combo with 24 PoE Injector Managed Switch - LPES-2224C

24 10/100TX + 2 1000T/SFP combo with 24 PoE Injector Managed Switch - LPES-2224C

24 10/100TX + 2 1000T/SFP combo with 24 PoE Injector Managed Switch - LPES-2224C

$ 1,600

OVERVIEW

Lantech LPES-2224C PoE switch is a highly integrated managed and PoE power feeding switch to deliver MTU, Transportation, VoIP, Surveillance applications. The 24 PoE interfaces provide flexible configuration options for the network.

Lantech LPES-2224C grounding and fuse design double protect switch from outside statistic electricity and high power input. LPES-2224C unique power and FAN monitoring and PD (power devices, like IP CAM, VoIP etc) power status monitoring provides centralized information for MIS. It also provides various PoE management functions such as power feeding priority, classification, disable / enable etc, which offer easy and user friendly interface for MIS.

Lantech LPES-2224C supports full SNMP functions including the latest traffic control protocols of VLAN, RSTP, IGMP Query and Snooping and Priority Queuing. The built-in IGMP Query function can eliminate the need of L3 switch in the same network for multimedia application.

Lantech LPES-2224C is the best PoE switch to connect with IP Camera, Setup box, VoIP phone / router, Wireless Equipments for MTU, Transportation or Surveillance applications.

FEATURES

Embedded 24 port PoE Injectors compliant with 802.3af up to 180W PoE power feeding
24 10/100TX support auto MDI/MDI-X function with 2 Gigabit combo interfaces
PD parametric information and power testing
QoS/CoS support
VLAN tagging (up to 4K)
802.3ad LACP
GVRP (256 groups)
Port mirroring / Port security
IGMP Snooping and Query mode
IGMP multicast groups
DHCP Client
802.1X RADIUS
SNTP support
Ingress / Egress packet filtering
User access authorization
Login IP source authorization
SNMP v1,v2
Remote upgrade support

Hardware Specification IEEE Standards IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX IEEE802.3z Gigabit Fiber IEE802.3ab Gigabit 1000BASE-T IEEE802.3x Flow Control and Back pressure IEEE802.3ad Port trunk with LACP IEEE802.1d Spanning tree protocol IIEEE802.1w Rapid spanning tree protocol IEEE802.1p Class of service IEEE802.1Q VLAN Tagging IEEE 802.1x user authentication IEEE802.3af Power over Ethernet Connectors 10/100TX: 24 x RJ-45 Gigabit Copper: 2 x RJ-45 2 MINI GBIC for MINI GBIC transceiver Switch architecture Store and forward switch architecture. Back-plane up to 8.8Gbps MAC address 8K MAC address table with Auto learning function LED System Power 10/100TX RJ-45 Port: Link/Active (Green: 1000Mbps/ Orange: 10/100Mbps), Full-duplex/collision MINI GBIC/ Copper: Link/Activity (Green:1000Mbps/ Orange: 10/100Mbps), Full duplex/collision Connector 24-port RJ-45 for 10/100TX RJ-45 Pin assignment and polarity: 1/2:RX signal RS-232 connector One RS-232 DB-9 female connector for switch management Remote power feeding End-point insert type and compatible with IEEE802.3af Per port feeding power: 15.4Watts (maximum) Power Embedded AC power supply: AC 100~240V, 50/60Hz, 200W Power consumption 20W (maximum /without PD) Ventilation 1 DC Fans with detect function Operating Temperature 0°C ~45°C (32°F ~113°F) Storage Temperature -40°C to 70°C (-40°F ~158°F) Case Dimension 440mm(W) x 280mm(D) x 44mm(H) EMI FCC Class A, CE Safety UL, cUL, CE/EN60950 Warranty 2 years Software Specification Management SNMP/ Telnet/ web-browser/ CLI management SNMP MIB RFC 1157 SNMP, RFC 1213 MIB II, RFC 1643 Ethernet like, RFC 1493 Bridge MIB, RFC 2674 VLAN MIB, private MIB, RFC 1628 UPS MIB, RFC3621 Power Ethernet MIB RFC standard RFC 2030 SNTP, RFC 2821 SMTP (option), RFC 1215 Trap, RFC 1757 RMON 1 Type of Trap Cold start, link down, link up, authorization fail, Trap station up to 3. Private trap for power supply device. Software Upgrade TFTP and console firmware upgradeable. Port Trunk Support IEEE802.3ad with LACP function. Up to 7 trunk groups and group member up to 4. The trunk port within 24-port 10/100TX and extension module. Spanning Tree Support IEEE802.1d spanning tree, IEEE802.1w RSTP VLAN Port based VLAN IEEE802.1Q Tag VLAN VLAN groups up to 256 Class of Service Per system supports high and low queues. The priority service rule: first come first service, all High before Low, WRR for High or low weight. Port-based Priority Support 3 settings: “Disable, Low or High priority”. When set to “Disable”, the income packet will follow QOS policy; Otherwise, the packet will follow port priority setting to “High/Low” queue. IGMP It supports IGMP snooping for multimedia application and supports 256 groups Port Security It supports ingress and egress MAC address filter and static source MAC address lock. Port Mirror Global system supports 3 mirroring types: “RX, TX and Both packet”. The maximum of port mirror entries is up to 25. Bandwidth Control Per port supports bandwidth control. Per level 100Kbps. 802.1x Authentication Supports IEEE802.1x User -Authentication and can report to RADIUS server. Reject / Accept / Authorize / Disable DHCP DHCP client Packet filter Broadcast storm filter Port configuration control Port Disable / Enable. PD detect control (enable/disable), Classification detect control (enable/disable) Fault status detect Null: no PD present Overload: current support over 475mA @ DC 48V and over 50 milliseconds DR fail: PD discovery resistor is not in the limited range Mode status System detects status, it will show I –sample, V-sample and R-detect. Parametric information It will show current PD parameters, it include Discover-resistor detected value, current, voltage, power consumption, classification current and determined class SNTP Supports RFC 2030 Simple Network Time Protocol System log System Log record up to 1000 entries. Power monitor Support power supply monitoring function for AC power, DC power, fan status Additional power supply can be installed with POE switch and POE-UPWM. Power testing Support test function to testing power supply. PoE Management PoE Enable/Disable, Power limit by Classification; Power limit by management, Power feeding priority Detect Legacy Signature *Future Release **Optional